Quotations are hereby invited for the following: Fuels & Lubricants: - 20 each x Fuel - Type: Two Stroke Mixture; Packaging: 20litre; Specification: the supply and delivery of a two-stroke fuel mix for the use in high performance air - cooled brush cutters and chainsaws. The product shall be designed to meet all tough challenges a two stroke engine oil can encounter as described. 1. The product offered shall be a combination of a fuel component (specifically designed for two-stroke equipment), which is blended together with a low smoke high performance lubricant at a ratio of 50:1, 2. The product shall offer the following benefits, in that it shall: - keep the engine clean and free from harmful deposits when the machine is being used under extreme difficult conditions for long periods of time. - lubricate all engine components thoroughly and effectively. - maintain a good flow rate even in extreme cold. - mix freely with fuel and remain in suspension. - have colouration so that one can see when it has been mixed. - minimize the build-up of sticky deposits. - be able to withstand high operating temperatures - have selected additives to combat negative effects of poor fuel quality. 3. The oils used as the lubricant shall be formulated from high quality HVI paraffinic base oils, blended from virgin base stock and containing suitable additives. Samples taken from any portion of the supply shall be free from impurities. No reclaimed oils are to be used. 4. The fuel mix lubricant component shall be a two- stroke self-mixing oil and not only meet but exceed the requirements of the specification JASO FB or API TC. The product offered must be approved by Stihl and Husqvarna horticultural equipment suppliers for use at a ratio of higher than 40:1 in air cooled engines operating up to 13 000 RPM at a high load. 5. Tenderers are requested to supply via a covering letter from either of the said manufacturers, confirmation that the product offered is OEM approved. 6. To ensure OEM acceptance of products offered in this tender, the product shall have API and/ or JASO performance licenses / certification the product shall be listed as approved on the API web site, 7. The product shall be supplied in new, sound, clean and dry 20 litre containers. Where plastic containers are used, certification of the plastic being suitable for such use must be provided. Alternatively, Council will provide jerry-can containers which must be filled at a controlled site. 8. The containers or packages supplied shall be clearly marked with the product name. The name characters "TWO STROKE FUEL MIXTURE" shall be approximately 20mm in height and shall be stencilled or labelled to ensure legibility. In order to avoid warranty disputes the City of Cape town will only accept offers from suppliers who are approved by Stihl or Husqvarna Original Equipment Manufacturers; Preferred Brand: Stihl & cutters or Equivalent. Delivery Date: 2023/12/04, Delivery To: Logistics - Delft Store Materials Store, Delivery Address: 1 Civil Depot, Delft. Please note that this quotation was published late. (Offre №92305548fr)