Quotations are hereby invited for the Supply and delivery of a feed mixer: St Helena Bay: Shera Farm. Feed mixer specifications: • Similar- or equal to the Rumax 5 (with 5m³ mixing capacity); • Single Auger; • Scale; • PTO shaft; • Hydraulic off-loading. The item is needed for delivery at St Helena Bay: Shera farms approximately 150km north of Cape town and 24km from Vredenburg. (Offre №77342954fr)

Country:

Langue: EN
Nombre: 77342954
Date de publication: 07-02-2023
Source: ONLINE TENDERS

La description

Les informations complètes sur l'appel d'offres sont fermées.
Pour plus d'informations sur le site, lisez les informations ci-dessous.

À propos de nous

Premier moteur de recherche pour les appels d'offres et les achats en Russie et dans le monde

La plus grande base de données d'appels d'offres et de sources d'approvisionnement en Russie et dans le monde
Newsletter quotidienne gratuite selon vos paramètres
Informations sur les lauréats dans le format dont vous avez besoin
Affichage pratique et téléchargement d'informations

Choisissez-nous

Mise en route

Inscription sur le site, après quoi les fonctions du site suivantes sont à votre disposition:

Abonnez-vous à des listes de diffusion gratuites pour vos phrases clés
Afficher les annonces d'appels d'offres
Exporter les informations récapitulatives au format Excel
Voir une partie des informations sur les gagnants, fournisseurs et clients des appels d'offres

Enregistrement

Pour utiliser toutes les fonctions du site et afficher toutes les informations, vous devez créer un compte commercial

Tarif sélectionné
Payez l'accès de l'une des manières possibles

Accès total

The Council for Geoscience (CGS) requires the services of a suitably qualified consultant in the property development environment. The person/company must not only have an integral and broader knowledge of the subject matter, but also administrative competencies. Scope: The essential services of this consultant to be appointed will be as follows: - The drafting of the tender specifications ensuring compliance with the CGS supply chain management requirements and procedures for the appointment of a consultant to do and feasibility study. The review, improvement, and development of evaluation criteria for these terms of references. - The overseeing of the feasibility study to ensure that all aspects are addressed, quality document, review of recommendations. - The expert consultant may be requested to assist in evaluating the bid to appoint a competent supplier for the feasibility study. Department: Supply Chain Management. Source: ONLINE TENDERS

Quotations are hereby invited for the Procurement of archive and storage boxes for Knowledge Centre. Scope: 1. A4 Archive boxes (Top opening) - 260 x 105 x 380 Fools Cap x 30 Each; 2. A4 Grey/Archive boxes (Side opening) - 260 x 105 x 380 Fools Cap x 30 Each; 3. Brown double wall cardboard box - 600mm x 400mm x 400mm x 30 Each; 4. Brown double wall - 7 cardboard box - 450mm x 300mm x 300mm x 30 Each. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Supply and delivery of transformer platforms steel work. Scope: 1. 4 pole transformer platform steel work with bolts, washers and nuts, Qty: 01. 2. 2 pole transformer platform steel work with bolts, washers and nuts, Qty: 01. Delivery point is Electro-technical Workshop, Knysna Municipality, Fechter Street, Knysna Industrial, 6570. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Supply and delivery of hose pipe. Specifications: 1. Supply and Delivery of 50-meter roll x 25mm Size Green hose pipe with 25 bar pressure rating with fittings x 10. Source: ONLINE TENDERS

Quotations are hereby requested from service providers for the supply and delivery of building material for Velddrif Area. Specifications: - 50mm x 5mm flat bar x 6; - 180mm x 90mm I beam (13m) x 3; - 228mm x 50mm x 6.6m pine x 20; - 76mm x 50mm x 6.0m pine x 25; - Hurricane clips x 200; - Perm fix (blue) x 6kg; - Galv IBR 6.0m x 0.47mm x 40; - Galv IBR 2.0m x 0.47mm x 15; - 75mm timbertec x 600; - 230mm x 230mm x 2.4m Galv barge board x 15; - 2520mm x 10mm x 3.6m; - Nutec Fascia board x 10; - 6m D shape PVC gutter x 10; - D-shape brackets x 40; - 25mm self-tapping screws x 150; - D-shape PVC outlets x 8; - 90 Deg bends PVC gutter x 10; - PVC Gutter down pipes x 8; - Holder bats x 12; - 5000L water tank x 1; - D-Shape joints PVC gutter x 10; - Stopends PVC gutter x 10; - 50mmx 50mm x 5mm angle iron 6m x 15; - 12mm round bar 8 Y16 steel x 16; - 75mm x 50mm x 10mm galv lip channel x 8; - 0.9mm fluxcore welding wire 5kg x 2; - Ref 193 sheet mesh wire x 6; - Galv Aluminium paint 5L x 4; - 115mm cutting disc x 20; - 115 Grinding disc x 20; - 230mm Cutting disc x 20. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Supply and delivery of tools. Specifications: 1. Schneider or equivalent LC1F 185 M7 (Contractor with 220V Coils) x 6; 2. Schneider or equivalent aux contacts LAD N22 x 20; 3. Schneider or equivalent aux contacts LAD 31 x 20; 4. Schneider or equivalent aux contacts LAD 13 x 20; 5. Schneider or equivalent overload unit LRD 33656 x 2; 6. Schneider or equivalent overload unit LRD 33696 x 2. Source: ONLINE TENDERS