Page d'accueil Offres par pays South Africa: Offres

Quotations are hereby invited for the following: Strip, repair, reassembly & test hub. Scope of work: 1. Replace all old studs, washers, and nuts (Back nut and wheel nuts); 2. Clean and Inspect gears and shaft gear for wear; 3. Clean shaft and inspect gear and spines; 4. Replace item no. 53 and 54 (Bearings); 5. Replace item no. 55 and 121 (Bushing); 6. Replace item no. 50 and 51 (Ring seal); 7. Replace item no. 303 (0 Ring); 8. Clean and repair holes on item no. 42 (Hub), Fill and rebuild holes with internal splines to accommodate tight stud"s fitment; 9. Clean and inspect gears on item no.302 (Piece, transition); 10. Fill and rebuild holes into correct size on item no. 302 (Piece, transition), that will accommodate tight stud"s fitment; 11. Remove broken inside pieces of item no. 313 (screws, hexagon) on Hub; 12. Replace item no.313 (screws, hexagon) x12; 13. Replace item no.68 (screws, hexagon) x12; 14. Assemble the unit up to item no.40 (Shaft vehicle); 15. Check if shaft is turning freely after fitment is completed; 16. Top up gear oil to keep gears and bearings lubricated; 17. Note: No grease to be used on this unit, it is oily lubricated. (Offre №103258300fr)

S'inscrire

Partager:
Country: South Africa
Langue: EN
Nombre: 103258300
Date de publication: 22-04-2024
Source:

La description

Les informations complètes sur l'appel d'offres sont fermées.
Pour plus d'informations sur le site, lisez les informations ci-dessous.

À propos de nous

Premier moteur de recherche pour les appels d'offres et les achats en Russie et dans le monde

  • La plus grande base de données d'appels d'offres et de sources d'approvisionnement en Russie et dans le monde
  • Newsletter quotidienne gratuite selon vos paramètres
  • Informations sur les lauréats dans le format dont vous avez besoin
  • Affichage pratique et téléchargement d'informations

Choisissez-nous

Mise en route

Inscription sur le site, après quoi les fonctions du site suivantes sont à votre disposition:

  • Abonnez-vous à des listes de diffusion gratuites pour vos phrases clés
  • Afficher les annonces d'appels d'offres
  • Exporter les informations récapitulatives au format Excel
  • Voir une partie des informations sur les gagnants, fournisseurs et clients des appels d'offres

Enregistrement

Pour utiliser toutes les fonctions du site et afficher toutes les informations, vous devez créer un compte commercial

  • Tarif sélectionné
  • Payez l'accès de l'une des manières possibles

Accès total
Modimolle-Mookgophong Local Municipality hereby invites experienced and suitable tenderers to express their interest in the following: Appointment of consultants in transactional advisory services. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Replacement of ZPMC TLS sheaves/Remove and replace TLS sheave 528. Scope: - Remove and replace TLS sheave 528 x 2. Please confirm the contract number as two were published. Source: ONLINE TENDERS

Modimolle-Mookgophong Local Municipality hereby invites experienced and suitable tenderers for the following: Refurbishment of Modimolle Offices (Ground Floor and First Floor), Once off. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Servicing of Autoclave, NHLS Histology Tygerberg – Cape Town – WC. Scope: 1. Servicing of laboratory equipment: - 1 x Servicing of Autoclave serial number 7410-4072.A1G.004497.A. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Strip, repair, reassembly & test hub. Scope of work: 1. Replace all old studs, washers, and nuts (Back nut and wheel nuts); 2. Clean and Inspect gears and shaft gear for wear; 3. Clean shaft and inspect gear and spines; 4. Replace item no. 53 and 54 (Bearings); 5. Replace item no. 55 and 121 (Bushing); 6. Replace item no. 50 and 51 (Ring seal); 7. Replace item no. 303 (0 Ring); 8. Clean and repair holes on item no. 42 (Hub), Fill and rebuild holes with internal splines to accommodate tight stud"s fitment; 9. Clean and inspect gears on item no.302 (Piece, transition); 10. Fill and rebuild holes into correct size on item no. 302 (Piece, transition), that will accommodate tight stud"s fitment; 11. Remove broken inside pieces of item no. 313 (screws, hexagon) on Hub; 12. Replace item no.313 (screws, hexagon) x12; 13. Replace item no.68 (screws, hexagon) x12; 14. Assemble the unit up to item no.40 (Shaft vehicle); 15. Check if shaft is turning freely after fitment is completed; 16. Top up gear oil to keep gears and bearings lubricated; 17. Note: No grease to be used on this unit, it is oily lubricated. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Strip, repair, reassembly & test hub. Scope of work: 1. Replace all old studs, washers, and nuts (Back nut and wheel nuts); 2. Clean and Inspect gears and shaft gear for wear; 3. Clean shaft and inspect gear and spines; 4. Replace item no. 53 and 54 (Bearings); 5. Replace item no. 55 and 121 (Bushing); 6. Replace item no. 50 and 51 (Ring seal); 7. Replace item no. 303 (0 Ring); 8. Clean and repair holes on item no. 42 (Hub), Fill and rebuild holes with internal splines to accommodate tight stud"s fitment; 9. Clean and inspect gears on item no.302 (Piece, transition); 10. Fill and rebuild holes into correct size on item no. 302 (Piece, transition), that will accommodate tight stud"s fitment; 11. Remove broken inside pieces of item no. 313 (screws, hexagon) on Hub; 12. Replace item no.313 (screws, hexagon) x12; 13. Replace item no.68 (screws, hexagon) x12; 14. Assemble the unit up to item no.40 (Shaft vehicle); 15. Check if shaft is turning freely after fitment is completed; 16. Top up gear oil to keep gears and bearings lubricated; 17. Note: No grease to be used on this unit, it is oily lubricated. Source: ONLINE TENDERS