Page d'accueil Offres par pays India: Offres

ARRANGEMENTS FOR THE ANNUAL SCIENTIFIC CONFERENCE 2023 (Offre №94446888fr)

S'inscrire

Partager:
Country: India
Langue: EN
Nombre: 94446888
Date de publication: 17-11-2023
Source:

La description

Les informations complètes sur l'appel d'offres sont fermées.
Pour plus d'informations sur le site, lisez les informations ci-dessous.

À propos de nous

Premier moteur de recherche pour les appels d'offres et les achats en Russie et dans le monde

  • La plus grande base de données d'appels d'offres et de sources d'approvisionnement en Russie et dans le monde
  • Newsletter quotidienne gratuite selon vos paramètres
  • Informations sur les lauréats dans le format dont vous avez besoin
  • Affichage pratique et téléchargement d'informations

Choisissez-nous

Mise en route

Inscription sur le site, après quoi les fonctions du site suivantes sont à votre disposition:

  • Abonnez-vous à des listes de diffusion gratuites pour vos phrases clés
  • Afficher les annonces d'appels d'offres
  • Exporter les informations récapitulatives au format Excel
  • Voir une partie des informations sur les gagnants, fournisseurs et clients des appels d'offres

Enregistrement

Pour utiliser toutes les fonctions du site et afficher toutes les informations, vous devez créer un compte commercial

  • Tarif sélectionné
  • Payez l'accès de l'une des manières possibles

Accès total
Quotations are hereby invited for the following: Service to Air-conditioners, Qty: 12. Province: KwaZulu-Natal. Department: Department of Health. Division: Supply Chain Management. Place where goods/services is required: PMB Assessment and Therapy Centre. Source: ONLINE TENDERS

Re-Advertisement: Bids are hereby invited for the appointment of service providers for the supply, delivery and installation of intercom in MRH Casualty and Pharmacy. Specifications: 1. Cabinet: 4U wall mount x 4; 2. AMP: Amplifier (Pro/production quality) x 4; 3. Microphone: HQ dynamic desktop microphone (high quality) x 8; 4. Audio cable: 2 core low voltage cable (approximate 1000m) x 4; 5. Sundries: Cables, bolts etc x 1; 6. Trunking: 25 x 40mm (approximately 40m) x 1; 7. Speaker: 10W 6’ wall mount speakers x 18; 8. Labour: Installation, tuning, setup etc x 1; 9. Warranty: 1 year maintenance and warranty plan, include equipment replacement x 1. Please note that this quotation was published late. Source: ONLINE TENDERS

Quotations are hereby invited for the following: Construction of (1 x 24m x 6m) turf cricket pitch at St Helena and Paternoster Cricket Fields. Scope: - Remove all topsoil from the area of the square (or the existing pitch); - Excavate out natural earth/existing pitch to a depth of at least 450 mm to Civil Engineering specification; - Rip and compact in-situ earth to 93% modified AASHTO; - Lay strip of 250-micron plastic down the edges of the excavation to prevent encroachment of invader grass species; - Add 100 mm thick layer of loam soil and mix in fertilizer as required by soil analysis. - A grid of levelling pegs is to be set out by the specialist contractor at two metre intervals with a longitudinal fall of 1:180 and a cross fall of 1:180. It is important to ensure that the pegs do not pierce the 250-micron plastic; - Roll in 150 mm thick clay in layers. A 100mm coarse bully soil is to be spread, lightly compacted and finished to an appropriate level; - A 50 mm layer of fine bully soil is to be spread and screeded to the final level of the grid pegs, ensuring that the desired surface finish and fall is achieved; - Prior to the commencement of grassing a true surface finish must be obtained; - Grass stolons (sprigs) of the species Cynodon dactylon (or latest approved grass species) are to be planted over the entire wicket (all wickets of “the square”) at a square spacing of 30mm apart. The planters must stand on wooden boards, or the like, whilst planting the stolons to ensure minimum disruption to the surface finish occurs; - The stolons must be inserted to the layer of topsoil/compost mixture to ensure adequate root development; - Add a thin layer of sieved bully to a depth of not more than 15 mm (sieve aperture of maximum 10 mm) over the grass and smooth; - Apply fertilizer and water twice daily with a fine nozzle spray until grass shown signs of sprouting; - The contractor shall maintain in good order, the whole of the works, for a period of six months after the certified completion of grass planting; - Continue to water until the grass has covered the pitch; - Once the grass has established, cut to 15 mm and rub in sieved (1.25 mm gauge screen) bully, to a smooth even surface, making sure that the grass tips protrude above the bully; - Water daily, as required, until the grass shoots push through; - Repeat the rubbing in process until a smooth even finish to the pitch has been achieved; - The final level of the pitch should be slightly above the surrounding field area; - Gradually work down the height of the grass to 6mm and the height of the grass is not to exceed 10mm between cuts; - Cutting to done with a 9-11 blade per cylinder cylindrical mower; - Hand weeding must be undertaken at least once a week for the first three months of maintenance; - Care must be taken to ensure that the surface levels are not disrupted excessively; - Compact with heavy roller to produce a hard-even surface [so that it is not possible to form depressions with fingers]. Source: ONLINE TENDERS

FRAMEWORK CONTRACT FOR THE PROCUREMENT OF MEDICINES/CONTRAST MEDIA Source: PPRA SERVICES PORTAL

Procurement of I.T. Equipment along with Server Room Source: PPRA SERVICES PORTAL

Establishment of Prayer Area Admin Block at GC Women University Sialkot Source: PPRA SERVICES PORTAL